For many years there was one reliable solution to store info on your personal computer – with a hard disk drive (HDD). Nevertheless, this sort of technology is already displaying it’s age – hard disks are noisy and sluggish; they can be power–hungry and frequently generate a lot of warmth for the duration of intense procedures.

SSD drives, on the other hand, are extremely fast, consume a smaller amount power and tend to be much cooler. They feature an exciting new strategy to file accessibility and storage and are years in advance of HDDs relating to file read/write speed, I/O operation as well as power capability. Figure out how HDDs stand up against the newer SSD drives.

1. Access Time

After the introduction of SSD drives, file accessibility rates are now over the top. Due to the new electronic interfaces employed in SSD drives, the typical data file access time has been reduced towards a all–time low of 0.1millisecond.

HDD drives even now makes use of the same general data access technique that’s actually developed in the 1950s. Though it was much upgraded since that time, it’s slower as compared to what SSDs are offering. HDD drives’ file access speed can vary in between 5 and 8 milliseconds.

2. Random I/O Performance

On account of the unique revolutionary data file storage technique adopted by SSDs, they have speedier data access rates and swifter random I/O performance.

Throughout our tests, all of the SSDs confirmed their capability to take care of a minimum of 6000 IO’s per second.

Hard drives offer slower file access speeds due to the aging file storage space and accessibility technology they’re using. Additionally they illustrate considerably reduced random I/O performance when compared to SSD drives.

During’s tests, HDD drives dealt with typically 400 IO operations per second.

3. Reliability

The lack of moving parts and spinning disks within SSD drives, as well as the latest developments in electrical interface technology have resulted in a considerably reliable data storage device, with an normal failure rate of 0.5%.

With an HDD drive to work, it must rotate two metallic hard disks at over 7200 rpm, having them magnetically stabilized in the air. There is a substantial amount of moving elements, motors, magnets and other devices crammed in a tiny space. Therefore it’s obvious why the normal rate of failing of any HDD drive ranges between 2% and 5%.

4. Energy Conservation

SSD drives are usually smaller than HDD drives and they don’t have any kind of moving elements whatsoever. Consequently they don’t make as much heat and require much less power to operate and fewer energy for chilling reasons.

SSDs consume between 2 and 5 watts.

HDD drives are famous for becoming loud. They require further electrical power for chilling reasons. On a web server which includes a multitude of HDDs running continuously, you need a great number of fans to keep them cooler – this makes them a lot less energy–economical than SSD drives.

HDDs take in in between 6 and 15 watts.

5. CPU Power

The speedier the data file accessibility rate is, the sooner the data file calls can be treated. Consequently the CPU won’t have to arrange resources looking forward to the SSD to answer back.

The normal I/O wait for SSD drives is barely 1%.

By using an HDD, you’ll have to dedicate additional time watching for the outcome of one’s data file ask. As a result the CPU will stay idle for further time, expecting the HDD to react.

The average I/O wait for HDD drives is about 7%.

6.Input/Output Request Times

Almost all of’s brand new machines are now using just SSD drives. Our very own lab tests have established that using an SSD, the average service time for any I/O request although operating a backup remains under 20 ms.

In comparison to SSD drives, HDDs deliver considerably reduced service times for input/output queries. In a hosting server backup, the common service time for an I/O query ranges between 400 and 500 ms.

7. Backup Rates

Talking about backups and SSDs – we’ve detected a fantastic improvement with the backup rate since we switched to SSDs. Now, a normal hosting server data backup requires solely 6 hours.

We worked with HDDs mainly for quite a while and we have got pretty good understanding of exactly how an HDD works. Creating a backup for a server designed with HDD drives will take about 20 to 24 hours.

Our cloud website hosting accounts offer SSD drives by default. Join our family here, at, and find out the way we just might help you enhance your site.

  • Service guarantees

  • Register today. There aren’t any installation service fees and you’ll have total root/administrator access to the server. 99.9% network availability is warranted.
  • Compare our prices

  • Check out our prices and pick the perfect Virtual Private Server for your dynamic websites. You can easily move up to a more feature–rich VPS Web Hosting configuration with only a click.
  • Compare our hosting plans
  • Contact Us

  • You can get in touch with us 24x7 by email or by utilizing our ultra–fast ticketing platform. We offer a 1–hour reply–back time warranty.